Archive for the ‘TestGear’ Category
T1 Basics
A T1 loop must be tested to verify that it complies with required specs. The tech will test the quality of the signal. Typically, testing signal quality involves placing a T1 signal on the local loop and measuring its performance over time. Continued here………….. Ebay ResultsClone Cable For JDSU Acterna Wavetek Stealth AnalyzersUS $47.00 End [...]
September 3, 2010
Tags: 15 Minutes, Ami, Customer Premise, Density, Drawback, Eight Bits, Faults, Local Loop, Niu, Qrss, Random Signal, Recovery Capabilities, Repeaters, Signal Quality, Signal Source, Span, T1 Signal, Test Pattern, Test Patterns, Zeros Posted in: TestGear 
No Comments
Borescopes
A borescope is an optical device consisting of a rigid or flexible tube with an eyepiece on one end, an objective lens on the other linked together by a relay optical system in between. More…………… Ebay Results72″ Video Bore Inspection Scope Visual Optics BorescopeUS $312.00 End Date: Friday Sep-03-2010 13:08:35 PDTBuy It Now for only: [...]
September 2, 2010
Tags: Aircraft Engines, Borescope, Burrs, Diesel Engines, Eyepiece, Flexible Tube, Forensic Applications, Illumination, Industrial Gas Turbines, Interior Surfaces, Internal Image, Maintenance Requirements, Objective Lens, Optical Device, Optical Fibers, Optical System, Outer Sheath, Steam Turbines, Surface Finish, Truck Engines Posted in: TestGear No Comments
Fluke DTX Cable Analyzer
The DTX Cable Analyzer Series from Fluke Networks is the testing platform for today – and tomorrow. This revolutionary new future-proof platform significantly reduces total time to certify by improving every aspect of the testing process. It all starts with 9-second Cat 6 Autotest that means you can meet TIA-568-B and ISO 11801:2002 certification requirements [...]
September 1, 2010
Tags: Accuracy Level, Autotest, Cat 6, Compliance, Copper, Dtx 10, Eia Standards, Ethernet Services, Fluke Dtx, Fluke Networks, Future Proof, Gig, Improving Every Aspect, Power Supply, Twisted Pair Cabling, Warranties Posted in: TestGear No Comments
xDSL Testing With A Field Spectrum Analyzer
xDSL achieves higher data rates over the existing copper by utilizing the frequencies well above the voice spectrum. POTS service uses the 300 Hz to 3200 Hz bandwidth; ADSL DMT uses up to 1.1 MHz and ADSL CAP extends up to 1.5 MHz. The frequency range is divided into 256 frequency bands of 4.3125 kHz [...]
September 1, 2010
Tags: Background Noise, Bandwidth, Copper, Digital Signals, Dmt, Dsl Circuits, Frequency Bands, Frequency Range, Frequency Spectrum, Higher Frequency, Hz, Impulse Noise, Noise Margin, Noise Measurement, Noise Source, Noise Sources, Pots, Power Spectral Density, Power Spectral Density Psd, Radio Transmission, Signal To Noise, Signal To Noise Ratio, Spectrum Analyzer, Synchronizing, Xdsl Posted in: TestGear No Comments
TEKTRONIX INET GEOPROBE GEO PROBE VOIP TESTING MONITOR
The GeoProbe product line addresses Network Assurance by providing network engineers with the information required to solve network and service problems across technologies, applications and element vendors. With GeoProbe products, network operations personnel can proactively monitor, manage, diagnose, and troubleshoot the overall health of mobile, fixed, and multi-service networks. In addition, GeoProbe empowers Engineering and [...]
August 31, 2010
Tags: Ap2, Bay 1, C16, Ds0, Ds1 Interface, Geoprobe, Gsm Gprs, Interface Board, Ip Networks, Management Decision, Network Assurance, Network Engineers, Network Operations, Network Traffic, Networks Network, Performance Statistics, Planning Departments, Power Adaptor, Q40, Service Networks, Technologies Applications Posted in: TestGear No Comments
